[讨论][注意]一点程序头中的基本功能和格式例子

只有更多的交流才能更快的成长

DMESW / COMAND ,'ReadWorkPieceTemperatur()'
DMISMN/'Startprogram'
V(0)=VFORM/ALL
DISPLY/TERM,DMIS,V(0),STOR,DMIS,V(0)
FILNAM/'Startprogram'
WKPLAN/XYPLAN
UNITS/MM,ANGDEC
DECPL/ALL,4
D(0)=DATSET/MCS
MODE/PROG,MAN
PRCOMP/ON
TEXT/OUTFIL,'****************************************************************$
**'
TEXT/OUTFIL,'__________________ Coromant UFUNC_MEASURE module _______________$
__'
TEXT/OUTFIL,'Ordernumber:       1016_ZI2_PROD.DMI'
TEXT/OUTFIL,'CMM:               CMM-code             Controller:         5'
TEXT/OUTFIL,'C-program number: '
TEXT/OUTFIL,'CAD-part:         345040A3213L0330TB_R1_LB'
TEXT/OUTFIL,'Date&time:         30 Mar 2009,   02:43:49'
TEXT/OUTFIL,'****************************************************************$
**'
S(M275_3)=SNSDEF/PROBE,FIXED,CART,50.00000,0.00000,0.00000,0.00000,1.00000,$
0.00000,5.00000
S(M275_5)=SNSDEF/PROBE,FIXED,CART,-50.00000,0.00000,0.00000,0.00000,-1.00000,$
0.00000,5.00000
S(M275_1)=SNSDEF/PROBE,FIXED,CART,0.00000,0.00000,10.00000,0.00000,0.00000,$
-1.00000,3.00000
S(M275_4)=SNSDEF/PROBE,FIXED,CART,0.00000,-10.00000,10.00000,0.00000,0.00000,$
-1.00000,3.00000
S(M270_3)=SNSDEF/PROBE,FIXED,CART,50.00000,0.00000,0.00000,0.00000,1.00000,$
0.00000,5.00000
S(M270_5)=SNSDEF/PROBE,FIXED,CART,-50.00000,0.00000,0.00000,0.00000,-1.00000,$
0.00000,5.00000
S(M270_4)=SNSDEF/PROBE,FIXED,CART,-10.00000,0.00000,10.00000,0.00000,0.00000,$
-1.00000,1.00000
S(M270_2)=SNSDEF/PROBE,FIXED,CART,10.00000,0.00000,10.00000,0.00000,0.00000,$
-1.00000,1.00000
TH(TOOLCH)=THLDEF/S(M275_3),1,S(M275_5),1,S(M275_1),1,S(M275_4),1,S(M270_3),$
1,S(M270_5),1,S(M270_4),1,S(M270_2),1
SNSLCT/S(M275_3)
SNSET/APPRCH,5.00000
SNSET/RETRCT,5.00000
PRCOMP/ON
GEOALG/CIRCLE,LSTSQR,ELIMINATE,STDDEV_LIMIT,3.00000,FILTER,CIRCULAR,LOWPASS,$
50.00000,GAUSS
GEOALG/CYLNDR,LSTSQR,ELIMINATE,STDDEV_LIMIT,3.00000,FILTER,CIRCULAR,LOWPASS,$
50.00000,GAUSS
GEOALG/PLANE,LSTSQR,ELIMINATE,STDDEV_LIMIT,3.00000,FILTER,LAMBDAC,LOWPASS,$
0.80000,GAUSS
SCNMOD/ON

------------------------------------------------------------------------
只有交流才能学习，只要学习就要交流！！！

RE:

          定义得很详细哦,从测头到算法到输出格式.

          用的哪个软件?

------------------------------------------------------------------------
爱科腾瑞（北京）有限公司

这个是我们标准产品用C语言做的程序处理出来的，我们用的编程工具是总公司开发的挂在UG上的。

------------------------------------------------------------------------
只有交流才能学习，只要学习就要交流！！！