设备未打开是啥意思

DECL/COMMON,INTGR,PPP1,PPP2,PPP3,PPP4
EEE =PROMPT/CHECK,'A',PPP1,$

          CHECK,'B',PPP2,$

          CHECK,'C',PPP3,$

          CHECK,'D',PPP4

IF/(PPP1.EQ.1)

WRITE/DID(DEFAULTSCREEN),'A'

F(PLN3) = FEAT/PLANE,CART, -0.005519, 0.376312, 47.063041, 0.000369,$
  -0.000201, 1.000000
$$ Measurement points are created through actual points
MEAS/PLANE, F(PLN3), 4
  PTMEAS/CART,   14.270992, 7.439269, 47.059199,   0.000369, -0.000201, 1.000000
  PTMEAS/CART,   15.830516, -5.884685, 47.055942,   0.000369, -0.000201, 1.000000
  PTMEAS/CART,   -15.062542, -7.296376, 47.067049,   0.000369, -0.000201, 1.000000
  PTMEAS/CART,   -15.061042, 7.247043, 47.069975,   0.000369, -0.000201, 1.000000
ENDMES

JUMPTO/(BBB)

ENDIF

(BBB)

IF/(PPP2.EQ.1)

WRITE/DID(DEFAULTSCREEN),'B'

F(LN3) = FEAT/LINE,BND,CART, -1.686923, -9.496001, 46.356645, -12.434014,$
  -9.423611, 46.356645, -0.006736, -0.999977, 0.000000
$$ Measurement points are created through actual points
MEAS/LINE, F(LN3), 3
  PTMEAS/CART,   -1.686923, -9.496001, 46.356645,   -0.006736, -0.999977, 0.000000
  PTMEAS/CART,   -6.987137, -9.460300, 46.356645,   -0.006736, -0.999977, 0.000000
  PTMEAS/CART,   -12.434014, -9.423610, 46.356645,   -0.006736, -0.999977,$
  0.000000
ENDMES

JUMPTO/(CCC)

ENDIF

(CCC)

IF/(PPP3.EQ.1)

WRITE/DID(DEFAULTSCREEN),'C'

F(PLN6) = FEAT/PLANE,CART, 6.954574, -9.016468, 55.628507, -0.006138,$
  -0.999843, 0.016628
$$ Measurement points are created through actual points
MEAS/PLANE, F(PLN6), 4
  PTMEAS/CART,   1.687595, -9.066255, 50.690638,   -0.006138, -0.999843, 0.016628
  PTMEAS/CART,   11.896763, -9.128927, 50.690626,   -0.006138, -0.999843, 0.016628
  PTMEAS/CART,   11.898542, -8.964702, 60.566138,   -0.006138, -0.999843, 0.016628
  PTMEAS/CART,   2.335394, -8.905988, 60.566625,   -0.006138, -0.999843, 0.016628
ENDMES

JUMPTO/(DDD)

ENDIF

(DDD)

IF/(PPP4.EQ.1)

WRITE/DID(DEFAULTSCREEN),'D'

F(LN8) = FEAT/LINE,BND,CART, -9.099554, 9.069627, 52.861583, -3.707236,$
  9.034702, 52.860612, 0.006477, 0.999979, 0.000000
$$ Measurement points are created through actual points
MEAS/LINE, F(LN8), 3
  PTMEAS/CART,   -9.099554, 9.069627, 52.861583,   0.006477, 0.999979, 0.000000
  PTMEAS/CART,   -7.198416, 9.057314, 52.861241,   0.006477, 0.999979, 0.000000
  PTMEAS/CART,   -3.707237, 9.034702, 52.860611,   0.006477, 0.999979, 0.000000
ENDMES

JUMPTO/(EEE)

ENDIF

(EEE)

------------------------------------------------------------------------
我是初学者，大哥们，请多多指教，谢谢了

可能是软件 输出窗口-->设置-->设备-->屏幕   这项没有勾选.

或者用语句open把设置defaultscreen 打开.

------------------------------------------------------------------------
关于精神病人的上网问题一直是我国治安管理条例中的空白.

大哥，谢谢了，嘻嘻，有人教就是容易学。

------------------------------------------------------------------------
我是初学者，大哥们，请多多指教，谢谢了